Lynx Technik yellobrik OBD 1910 10Gbit/s Ethernet to Fiber bidirectional Transceiver

The Yellobrik OBD 1910 is a plug-and-play solution designed to extend 1Gbit/s or 10Gbit/s Ethernet networks over long distances using a single bidirectional fiber link. Utilizing Wavelength Division Multiplexing (WDM) technology, it enables full-duplex communication over a single single-mode fiber, effectively doubling the data transmission capacity without the need for additional fiber infrastructure. The kit includes two modules and two power supplies, ensuring a straightforward setup without complex configurations.

Key Features

• Supports standard Ethernet/Optical signals at 10Gbit/s or 1Gbit/s
• Extends 10G Ethernet up to 30km (18.6 miles) over a single bidirectional single-mode fiber link*
• Maximum throughput of 20Gbit/s (full-duplex)
• Includes two modules and two power supplies
• Power and signal present LED indication
• Simple plug-and-play operation
• Supports hot swapping and hot plugging

Technical Specifications

SFP Slots

• 2 x 10 Gigabit SFP+ slots (Port 1 & 2)
• Supports 10GBase-T SFP, 10GBase-X, 1000Base-T
• Compliant with IEEE 802.3ae

Port 1

• 10Gbit/s Base Optical Bidirectional Transceiver SFP
• 1270nm and 1330nm wavelengths - bidirectional (WDM)
• Simplex LC connector
• TX Optical Power: 0 to 5dBm
• RX Sensitivity: -15dBm
• Maximum distance: up to 30km (18.6 miles)*

Port 2

• 10Gbit/s Base Electrical I/O SFP (OBD 1910 E)
• 10 Gigabit Ethernet
• RJ-45 connector via Cat6a/Cat7 cable
• Maximum distance: up to 30m (98.4ft)*

LED Indicators

• 3 LEDs: 1x Power LED, 2x Signal present LEDs

Power

• +12V DC @ 4W with SFPs (supports 7 - 15V DC input range)

Physical

• Size: 120mm x 42mm x 22mm (4.73” x 1.65” x 0.86”) including connectors
• Weight: 125g (4.4oz)

Ambient

• Operating temperature: 5 - 40ºC (41 - 104ºF)
• Humidity: 90% (non-condensing)

*Distance is an approximation. Actual distances achieved can be longer or shorter depending on the type of fiber cable and accumulated optical losses in the fiber link. Determine link losses and perform optical budget calculations to ensure correct operation.