Lynx Technik yellobrik ODT 1510 RS232/422/485 and GPI Fiber Transceiver

The ODT 1510 is a multi-function module engineered to extend the reach of serial communications and GPI connections over fiber, making it ideal for applications requiring long-distance control and data transmission. When paired with another ODT 1510 at the remote location, it facilitates the extension of RS232, RS422, or RS485 serial standards, along with two GPI connections, over distances up to 10 km (6.2 miles) using single-mode fiber.

Key Features

• Extends serial and GPI connections up to 10 km over single-mode fiber
• Supports RS232, RS422, or RS485 serial standards
• Provides 2 GPI connections
• Operates at 1310 nm wavelength for single-mode fiber
• Utilizes LC/PC duplex fiber connectors
• Features switchable RX/TX crossover
• Offers automatic or manual data direction control
• Includes switchable end-of-line termination
• Plug-and-play design with no need for PC software drivers
• Supports all standard and proprietary serial protocols

Technical Specifications

Serial Interface

• Standards Supported: RS232, RS422, RS485 (selectable)
• Connector: RJ45
• Baud Rate: Auto-sensing and auto-adjusting from 300 to 460K baud
• Settings: Selectable via integrated dip switch for serial standard, termination, RX/TX crossover, and data direction
• Indicators: LED status indicators for serial TX and RX activity
• ESD Protection: Up to 26 kV

GPI Interface

• Inputs: 2 GPI inputs via RJ45 connector
• Outputs: 2 GPI outputs via RJ45 connector
• Indicators: LED status indicators for GPI input and output activity

Fiber Optic Interface

• Type: Single-mode fiber
• Connectors: LC/PC duplex
• Transmit Wavelength: 1310 nm
• Transmit Power: -3 dBm
• Receive Wavelength Range: 1260 nm to 1620 nm
• Receiver Sensitivity: -3 dBm to -21 dBm
• Maximum Distance: Up to 10 km (6.2 miles)

Power Requirements

• Voltage: +12V DC (supports 7-15V DC input range)
• Power Consumption: Approximately 2.0W

Physical Characteristics

• Dimensions: 105 mm x 95 mm x 22 mm (4.13” x 3.74” x 0.86”)
• Weight: 200 g (7.05 oz)
• Operating Temperature: 0°C to 50°C (32°F to 122°F)
• Humidity: Up to 90% (non-condensing)

Ordering Information

• ODT 1510: RS232/422/485 and GPI Fiber Transceiver
• RFR 1200: High-power yellobrik 19” 1RU Rack Frame
• RFR 1001: yellobrik Mounting Bracket
• LC/SC Dup: LC Connector to SC Connector Adapter Kit
• LC/ST Dup: LC Connector to ST Connector Adapter Kit
• P-TAP 1000: P-TAP Battery Adapter Cable
• XLR 1000: 4-Pin XLR Camera Battery Adapter Cable