Lynx Technik yellobrik OET 1940 10Gbit/s Ethernet to Fiber Transceiver

The OET 1940 series by LYNX Technik AG is engineered to extend the reach of 1Gbit/s or 10Gbit/s Ethernet signals over fiber optic cables, providing flexible solutions for diverse networking requirements. The series includes three main variants:

• OET 1940 (Copper ◄► CWDM): Converts electrical RJ-45 Ethernet signals to CWDM multiplexed fiber optic signals. This variant includes a 10Gbit/s RJ45 electrical SFP, with the CWDM SFP purchased separately based on the required wavelength.
• OET 1940 MC (Multimode ◄► CWDM): Facilitates conversion between optical multimode and CWDM fiber. It comes with a multimode SFP, while the CWDM SFP needs to be selected separately.
• OET 1940 MS (Multimode ◄► Singlemode): Enables seamless conversion between multimode and single-mode fiber. This variant includes both multimode and single-mode SFPs, each with two fiber connections (one for TX and one for RX) utilizing LC connectors.

Key Features

• Supports standard Ethernet/Optical signals at 10Gbit/s or 1Gbit/s.
• Provides solutions for:
  • Electrical to CWDM fiber conversion.
  • Multimode fiber to single-mode fiber conversion.
  • Multimode to CWDM fiber conversion.
• Equipped with two 10Gbit/s transceiver ports (electrical/optical).
• Offers a maximum throughput of 20Gbit/s (full duplex).
• Supports transmission distances up to 25 km (15.5 miles) over single-mode fiber.*
• Features power and signal present LED indicators for easy monitoring.
• Supports hot swapping and hot plugging for flexible operation.

Technical Specifications

SFP Slots

• Two 10 Gigabit SFP+ slots (Port 1 & 2).
• Supports 10GBase-T SFP, 10GBase-X, and 1000Base-T IEEE 802.3ae standards.

Port 1 (Optical)

• 10Gbit/s Base Optical Long Reach+ Transceiver SFP (OET 1940 MS):
  • Wavelength: 1310 nm (single-mode).
  • Connector: Duplex LC.
  • TX Optical Power: -3 to +1 dBm.
  • RX Sensitivity: -14.4 dBm.
  • Maximum Distance: Up to 20 km (~12.4 miles).*
• 10Gbit/s Base Optical CWDM Transceiver SFP (OET 1940 / OET 1940 MC):
  • Wavelengths: 1470/1490/1510/1530/1550/1570/1590/1610 nm.
  • Connector: Duplex LC.
  • TX Optical Power: 0 to 4 dB.
  • RX Sensitivity: -23 dBm.
  • Maximum Distance: Up to 25 km (~15.5 miles).*

Port 2 (Electrical/Optical)

• 10Gbit/s Base Electrical I/O SFP (OET 1940):
  • Supports 10 Gigabit Ethernet via Cat6a/Cat7 cable.
  • Connector: RJ-45.
  • Maximum Distance: Up to 30 m (~98.4 ft).*
• 10Gbit/s Base Optical Multimode Transceiver SFP (OET 1940 MC / OET 1940 MS):
  • Wavelength: 850 nm (multimode).
  • Connector: Duplex LC.
  • TX Optical Power: -6 to -1 dBm.
  • RX Sensitivity: -11 dBm.
  • Maximum Distance: Up to 300 m (~984.2 ft) over 50/125µ OM3 fiber.*

LED Indicators

• Three LEDs: One for power status and two for signal presence.

Power Requirements

• Voltage: +12V DC (supports 7 - 15V DC input range).
• Power Consumption: Approximately 4.6W with SFPs.

Physical Characteristics

• Dimensions: 120 mm x 42 mm x 22 mm (4.73” x 1.65” x 0.86”) including connectors.
• Weight: 125 g (4.4 oz).
• Operating Temperature: 5°C to 40°C (41°F to 104°F).
• Humidity: Up to 90% (non-condensing).

Ordering Information

• OET 1940: 10Gbit/s Ethernet to CWDM Fiber Transceiver.
• OET 1940 MS: 10G