We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
FSP CANNON PRO(ATX3.1) 2500W power supply unit 20+4 pin ATX ATX Black
SKU
PPA25A0102
£486.14
£405.12
In stock
Approx. 6 available.
2500W, ATX12V V3.1, 200-240V, 50/60Hz, 200 x 150 x 86 mm
- Efficiency ≧ 94% at typical load
- 80 PLUS® 230V EU platinum certified
- Provide 4 native PCIe 12V-2x6 connectors and cables
- Top-notch topology of full-bridge & LLC converter and synchronous rectifier & DC-DC converters
- Infineon MOSFETs and SiC diodes for high efficiency and reliability.
- 420V 105°C Japanese bulk capacitor
- Quiet and long-lasting 135mm silent fan
- Fully modular cabling design
- Off-Wet, off-dust and off-stain conformal coating
- Complete protections: OVP, OCP, OPP, OTP, SCP, UVP, SIP, NLO
| SKU | PPA25A0102 |
|---|---|
| EAN | 4711498480286 |
| Manufacturer | FSP |
| Availability | Y |
The Future is Now：ATX 3.1 & PCIe Gen 5.1 Ready
Following the latest ATX 3.1 & PCIe Gen 5.1 regulation, this series supports 2 x total power excursion and 3 x GPU excursion to provide peak performance with modern hardware or future upgrades.
High efficiency in Platinum-certified
Certified by world-class organizations 80 PLUS® 230 EU platinum certification for lower power loss, less heat, and quieter operation.
Ready to Build Your Own AI PC Station
4 x PCIe 12V-2x6 and 3x PCIe 8 pin connectors
Supports four 12V-2x6 connectors and three 6+2 pin connectors, providing the power needed for high-end gaming, rendering, and multi-GPU setups.
Fully Modular Cabling Design
To make power supply installation easy and allows users to use only the needed cables, improving airflow and reducing system clutter.
+5V & 3.3V DC to DC Circuit Design
Both of +3.3V and +5V DC – DC module combined +12V SR circuit offers supreme efficiency, voltage stability and high system compatibility especially in cross regulation(unbalance load) mode.
105℃ Japanese Bulk Capacitor
The bulk capacitor inside serves to support working under an extremely harsh environment, such as with high temperatures, peak voltage fluctuations. It stabilizes the performance for high reliability that your system can count on.
Powerhouse Yet Energy-saving
High energy conversion up to 94% and 70% efficiency at 2% loading, with less than 0.5W consumption in standby mode, ensures an energy-efficient, cost-effective system that is also eco-friendly.
The Premium Quality FDB Fan
Built with optimized thermal solution and an advanced 135mm fluid dynamic bearing fan for cooler components and quieter operation.
Industrial – design: Conformal Coating for Rigorous Computing Environments
Provide power stably under rigorous, high-speed computing environments that need to operate 24 hours a day without interruptions.
Fortress-level Protection
Our comprehensive circuit shields your valuable components from harm.
Following the latest ATX 3.1 & PCIe Gen 5.1 regulation, this series supports 2 x total power excursion and 3 x GPU excursion to provide peak performance with modern hardware or future upgrades.
High efficiency in Platinum-certified
Certified by world-class organizations 80 PLUS® 230 EU platinum certification for lower power loss, less heat, and quieter operation.
Ready to Build Your Own AI PC Station
4 x PCIe 12V-2x6 and 3x PCIe 8 pin connectors
Supports four 12V-2x6 connectors and three 6+2 pin connectors, providing the power needed for high-end gaming, rendering, and multi-GPU setups.
Fully Modular Cabling Design
To make power supply installation easy and allows users to use only the needed cables, improving airflow and reducing system clutter.
+5V & 3.3V DC to DC Circuit Design
Both of +3.3V and +5V DC – DC module combined +12V SR circuit offers supreme efficiency, voltage stability and high system compatibility especially in cross regulation(unbalance load) mode.
105℃ Japanese Bulk Capacitor
The bulk capacitor inside serves to support working under an extremely harsh environment, such as with high temperatures, peak voltage fluctuations. It stabilizes the performance for high reliability that your system can count on.
Powerhouse Yet Energy-saving
High energy conversion up to 94% and 70% efficiency at 2% loading, with less than 0.5W consumption in standby mode, ensures an energy-efficient, cost-effective system that is also eco-friendly.
The Premium Quality FDB Fan
Built with optimized thermal solution and an advanced 135mm fluid dynamic bearing fan for cooler components and quieter operation.
Industrial – design: Conformal Coating for Rigorous Computing Environments
Provide power stably under rigorous, high-speed computing environments that need to operate 24 hours a day without interruptions.
Fortress-level Protection
Our comprehensive circuit shields your valuable components from harm.
| Cooling | |
|---|---|
| Fan diameter | 13.5 cm |
| Number of fans | 1 fan(s) |
| Fan location | Top |
| Performance | |
| On/off switch | Yes |
| Power supply unit (PSU) form factor | ATX |
| 80 PLUS certification | 80 PLUS Platinum |
| Purpose | PC |
| ATX version | 3.1 |
| Bearing technology | FDB |
| Design | |
| 80 PLUS certification | 80 PLUS Platinum |
| Product colour | Black |
| Fan diameter | 13.5 cm |
| On/off switch | Yes |
| Number of fans | 1 fan(s) |
| Fan location | Top |
| Power | |
|---|---|
| Total power | 2500 W |
| AC input voltage | 200 - 240 V |
| AC input frequency | 50/60 Hz |
| Input current | 15 - 12 A |
| Power factor | 0.9 |
| Power Factor Correction (PFC) type | Active |
| Combined power (+3.3V) | 125 W |
| Combined power (+12V) | 2499.6 W |
| Combined power (+5V) | 125 W |
| Combined power (-12V) | 3.6 W |
| Combined power (+5Vsb) | 20 W |
| Max output current (+3.3V) | 25 A |
| Max output current (+12V) | 208.3 A |
| Max output current (+5V) | 25 A |
| Max output current (-12V) | 0.3 A |
| Max output current (+5Vsb) | 4 A |
| Power protection features | No load operation, Over current, Over power, Over voltage, Short circuit, Surge and inrush, Under temperature, Under voltage |
| Efficiency | 94% |
| Ports & interfaces | |
| SATA power cable length | 965 mm |
| Peripheral (Molex) power cable length | 965 mm |
| Motherboard power connector | 20+4 pin ATX |
| Number of SATA power connectors | 8 |
| Peripheral (Molex) power connectors (4-pin) | 4 |
| PCI Express power connectors (6+2 pin) | 3 |
| PCI Express power connectors (8-pin) | 8 |
| CPU power connector (4+4 pin) | Yes |
| ATX power connector (20+4 pin) | Yes |
| Cabling type | Fully-Modular |
| Number of SATA power cables | 2 |
| Weight & dimensions | |
| Width | 150 mm |
| Depth | 200 mm |
| Height | 86 mm |
| Certificates | |
| 80 PLUS certification | 80 PLUS Platinum |
You may also be interested in
| Product |
FSP CANNON PRO(ATX3.1) 2500W power sup...
£486.14
£405.12
|
Ubiquiti USP-RPS power supply unit 995...
£391.44
£326.20
|
be quiet! Dark Power Pro 13 | 1600W po...
£428.52
£357.10
|
|---|---|---|---|
| SKU |
PPA25A0102
|
USP-RPS
|
BN332
|
| Manufacturer |
FSP
|
Ubiquiti
|
be quiet!
|
| Purpose |
PC
|
N/A
|
PC
|
| Power supply unit (PSU) form factor |
ATX
|
1U
|
ATX
|