Lynx Technik yellobrik OTX 1410-LC-40 12G, 6G, 3G, HD SDI to Fiber Optic Transmitter

The OTX 1410-LC-40 addresses the challenges of distributing uncompressed video signals over extended distances by converting SDI signals to optical format. This module supports 12G, 6G, 3G, and 1.5G SDI video standards, making it versatile for various broadcast applications. Operation is fully automatic; the SDI video format is detected, reclocked, and transmitted over the fiber optic connection. A reclocked electrical SDI loop-out is also provided for monitoring or distribution purposes. The OTX 1410-LC-40 variant is equipped with an LC connector and is optimized for single-mode fiber connections, ensuring high-quality signal transmission over distances up to 40 km (24.8 miles). :contentReference[oaicite:4]{index=4}

Key Features

• Supports 12G, 6G, 3G, and 1.5G SDI video inputs
• Compatible with 3G Level A and Level B formats
• Auto reclocking at 1.5G, 3G, 6G, and 12G
• Error-free optical transmission
• Reclocked SDI loop-out connection
• LC connector variant
• Single-mode fiber connection
• Up to 40 km (24.8 miles) transmission at 12Gbit/s (single-mode) with OTX 1410-LC-40 variant
• Hot swappable and hot pluggable

Technical Specifications

SDI Input

• 1 x SDI video input and 1 x SDI reclocked loop output
• 75 Ohm BNC connectors
• Standards: SMPTE 2082-1, SMPTE 2081-1, SMPTE 424M, SMPTE 292M
• Multi-standard operation from 1.5Gbit/s to 12Gbit/s
• Multirate reclocking: 1.5Gbit, 3Gbit, 6Gbit, 12Gbit
• Automatic cable equalization:
  • 260m @ 1.5Gbit/s (Belden 1694A cable)
  • 150m @ 3Gbit/s (Belden 1694A cable)
  • 90m @ 6Gbit/s (Belden 4794R cable)
  • 80m @ 12Gbit/s (Belden 4794R cable)

Optical Output

• 1 x fiber optic output
• Single-mode fiber using LC/PC connection
• Standard: SMPTE 297M - 2006
• Wavelength: 1310nm
• Optical power: -3dBm (typical)
• TX active LED indicator on the side of the module
• Maximum distance: up to 40 km (24.8 miles) at 12Gbit/s (single-mode) with OTX 1410-LC-40 variant

Power Requirements

• Input voltage: +12V DC (supports 7 - 24V DC input range)
• Power consumption: Approximately 1.9W nominal
• Power LED indicator on the side of the module

Physical Characteristics

• Dimensions (including connectors): 140mm x 42mm x 22mm (5.51” x 1.65” x 0.86”)
• Weight: 180g (6.35oz)
• Operating temperature: 5°C to 40°C (41°F to 104°F)
• Humidity: Up to 90% (non-condensing)

Ordering Information

• OTX 1410-LC-40: 12G, 6G, 3G, 1.5G SDI to Fiber Optic Transmitter - 40km/24.8mi - LC Connector
• ORX 1400: 12G, 6G, 3G, HD Fiber Optic to SDI Receiver
• RFR 1200: High-power yellobrik 19” 1RU Rack Frame
• RFR 1001: yellobrik Mounting Bracket
• LC/ST Dup: LC Connector to ST Connector Adapter Kit
• LC/SC Dup: LC Connector to SC Connector Adapter Kit
• P-TAP 1000: P-TAP Battery Adapter Cable
• XLR 1000: 4 Pin XLR Camera Battery Adapter Cable